AUX Power Cable for Smart DewHeater Controllers
$16.95
In StockOrders of $50 or more are eligible for free ground shipping! Contiguous USA only. Product exceptions apply.
- Add this cable to use the Smart DewHeater Controllers’ AUX ports when using a third-party (i.e., non-Celestron) telescope mount
- Provides power to the Smart Dew Heater Controllers’ AUX ports so you can power additional telescope accessories
Overview
- Add this cable to use the Smart DewHeater Controllers’ AUX ports when using a third-party (i.e., non-Celestron) telescope mount
- Provides power to the Smart Dew Heater Controllers’ AUX ports so you can power additional telescope accessories
Description
Optimize your setup to run smoothly and the way you want—even with a third-party (i.e., non-Celestron) computerized telescope mount. This cable provides power to the AUX ports on your Celestron Smart DewHeater Controller.
Plug this AUX port cable into one of your controller’s 12V DC power outputs and one of its AUX ports. When you switch the controller on, the cable provides power to run accessories through the controller’s other AUX port(s), such as the SkyPortal WiFi Module (for wireless PC connection) or the Celestron Focus Motor.
Note: If you already use a Celestron mount, you do not need to purchase this AUX port cable. The AUX cable connection to your mount already provides power to the AUX ports.
Specifications
General | |
---|---|
Cable: | Coiled cable, 250mm long |
Barrell Connector for Power Port: | 5.5mm inner diameter/ 2.1 outer diameter |
Modular Connector for AUX Port: | RJ-25 plug, 6P6C |
California Residents | View Proposition 65 Warning![]() WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Videos
FAQ
I am using the Smart DewHeater Controller along with a SkyWatcher mount and am attempting to control both with PC software (i.e. CPWI for the Smart DewHeater Controller and other software for the SkyWatcher mount). The controller and the mount are showing up on the same COM port on the PC, which causes software connection issues. What do I do?
- The work around is to plug the controller into a USB port on the PC and connect to it via CPWI first, then plug the mount into another USB port on the PC. This prevents the SkyWatcher mount from attempting to operate on the same USB port as the Smart DewHeater Controller.
Support & Downloads
Reviews
There are currently no customer reviews.